Blog

We have read about the removal of a water storage tank before.

It’s time to learn about the installation of a new water storage tank now. When you are looking to install a new water storage tank, search for a company that provides complete services. From tank procurement to installation, all kinds of support, startup, commissioning and training, every part of the tank installation process should be covered. Always trust Penguin Tank on this as they provide a complete solution to all plastic water storage tank related services. These include installation drawings, startups, commissioning, site evaluation, electrical and plumbing installation, control systems installation, installation of tanks, remote monitoring and so on.

  • It is clear that installation of a tank requires detailed attention and no stone should be left unturned. Let us discuss in detail the step by step process while installing an above-ground water storage tank.

  • It should be installed as high as possible to get the best water pressure.

  • A supporting framework can be constructed to achieve the best height. It should be strong enough to take the weight of the water tank.

  • A firm base has to be prepared or selected such as a stand, cement that are well supported are required to support the complete underside of the tank.

  • All dirt and pebbles larger than half an inch should be cleaned or removed.

  • Tanks can be moved by pick up truck or trailer.

  • Stopcocks and gate valves fitted to the inlets and outlets of the tank makes life easier for future plumbing work, whenever required.

  • A filter should be added to the overflow pipe.

  • The pipe connections are done using tank couplers, the pipes are connected to the compression joint on the outside of the tank.

  • Further, a ballcock and a float valve backing plate must be fitted to avoid any long-term failure of the tank.

  • Plumb the distribution pipes and tighten the nuts firmly.

  • Attach a gate valve to each outlet pipe.

  • Attach an overflow to the tank to avoid an overflow of water.

  • Connect the new tank to the pumping system.

  • Now fill water in the new storage tank and at the same time check for leaks, if found any.

  • You are ready to use your new tank.

Although, these services are provided by us and we make sure that you do not face any difficulty with our water storage tanks at any point in time.

Leave a Reply